Features:Used for fixed electric drills, no need to repeatedly invest in bench drills!Similar to Buddha beads, bead punching, this kind of hole requires more precise position for punching It is generally not recommended to use this bracket, because there will be a deviation of about 1-3mm.(The specific deviation has a lot to do with the concentricity of the used electric drill and the personal operating technique.)The electric drill has high concentricity and low vibration, which can reduce deviation.
Schematic diagram of electric drill to bench drill. The electric drill in the picture needs to be matched by yourself.
The hole of the bracket that fixes the electric drill, the diameter is between 38MM-43MM(Note: The position on the electric drill used to install the handle, the diameter is between 38mm-43MM, and the length reaches 20MM. Generally, it can be used. Not all electric drills can be used.Matched). The diameter of the movable hole next to it is 35mm, which is generally a fixed electric grinder.
2.5 inch flat-nose pliers size introduction:
3 inch flat nose pliers size introduction:
The electric drill bracket and flat-nose pliers can be fixed together with screws. (Buy the bracket + flat-nose pliers package---the fixed screw will be given.)